FumeVac FCA000182 Secondary Filter for FV-500-20 (1226 PTFE, MERV 16)
Buying for a business? Purchase orders, invoicing and tax-exempt purchasing are available. Set up a business account
Replaces OEM part numbers: EQ-IVFE-500-20-NP
Description
Genuine FumeVac FCA000182 secondary filter for the FV-500-20: a 1226 cartridge, 12.74" OD x 26" long, open on one end and closed on the other, with spunbond polyester media and a PTFE membrane, MERV 16, 104 sq ft, outer support bands and a gasket under the flange (RX part FCA000182). The FV-500-20 runs two 12.74" x 26" primary cartridges (SKU 50590, or the nanofiber option SKU 50609), followed by this MERV 16 secondary filter, one per unit. FV-500-20 units with older serial numbers used a different secondary filter, so check the part number on the one you take out. It is also the second-stage filter for Henlex HVMAX units built after mid-2019, where it replaces the MERV 15 second-stage filter (EQ-IVFE-500-20-NP). Specifications: • Size: 12.74" OD x 26" long (1226) • Ends: open / closed, gasket under the flange • Media: spunbond polyester with PTFE membrane, MERV 16, 104 sq ft • Outer support: bands • Stage: secondary filter Fits: • FumeVac FV-500-20 (1 per unit) • Henlex HVMAX built after mid-2019 (second stage) Replace it when your gauge reaches the change point. In-stock orders placed by noon CT ship the same business day. Not sure it's the right one? Measure your old filter (OD, length and which ends are open) or send us its part number or a photo through the chat button, and we'll confirm the match before you order. 30-day returns.
Specifications
Download spec sheet (PDF)Dimensions Dimensions The filter's size in inches (for media rolls, the length is in feet). Panel and bag filter sizes are nominal, so the actual filter can measure slightly smaller. | 12.74 in. OD x 26 in. long |
Filter Size Filter Size The physical dimensions or nominal size of a filter, used to ensure proper fit and compatibility with the equipment. | 1226 |
Filter Ends Filter Ends The design and configuration of a filter’s end caps or closures, which determine how the filter is sealed and mounted in the system. | Open / Closed (O/C) |
Media Type Media Type The material or composition of the filter media, which determines filtration efficiency, durability, and application suitability. | Spunbond Poly |
MERV MERV A standardized rating (Minimum Efficiency Reporting Value) that indicates how effectively a filter captures airborne particles, with higher values representing finer filtration. | 16 |
Media Surface Footage (Sq') Media Surface Footage (Sq') The total surface area of the filter media, measured in square feet, which affects airflow capacity and dust-holding performance. | 104 |
Outer Shell Outer Shell The external layer or casing of the filter that provides structural support and protects the filter media during operation and handling. | Bands |
Filter Stage Filter Stage Where the filter sits in your collector: a pre-filter catches larger particles first, the main filter does most of the filtering, and an after-filter is the final stage. | After |
Substitute For Substitute For Identifies alternative or equivalent part numbers that this filter can replace in compatible systems. | EQ-IVFE-500-20-NP |




