Replacement for Amtech 351D66A8588GS Aluminized Spunbond Cartridge Filter with Ground Wire (ATV / ATH Series)
Buying for a business? Purchase orders, invoicing and tax-exempt purchasing are available. Set up a business account
Replaces OEM part numbers: 351D66A8588GS
Description
Replacement for Amtech 351D66A8588GS: aluminized spunbond polyester cartridge filter with a ground wire, fire-retardant, MERV 11, 100 sq ft (RX part FCA000135). This 1426 cartridge is 13.8" OD x 9.4" ID x 26" long, open at both ends, with outer support bands. The aluminized face of the media and the ground wire let static charge drain to the grounded collector, for dusts where static build-up is a concern. Amtech lists the 351D66A8588GS as a 100 sq ft aluminized spunbond polyester filter with a ground strap for its ATV and ATH series; this replacement uses a ground wire and fire-retardant media. Connect the ground wire to the collector when you install it. It also fits IVEC IVDC series collectors that take the same 13.8" x 26" open/open cartridge. Specifications: • Size: 13.8" OD x 9.4" ID x 26" long (1426) • Ends: open / open • Media: aluminized spunbond polyester, fire-retardant, MERV 11, 100 sq ft • Grounding: ground wire • Outer support: bands • Stage: main filter Fits: • Amtech ATV series • Amtech ATH series (26" cartridge models) • IVEC IVDC series Same size without the aluminized finish: SKU 50550 (spunbond, MERV 11, 120 sq ft). For fine dust: SKU 50548 (nanofiber, MERV 15, 254 sq ft). Check your collector's manual for the cartridge count. Replace when pulse cleaning no longer brings the pressure drop back down. In-stock orders placed by noon CT ship the same business day. Not sure it's the right one? Measure your old filter (OD, length and which ends are open) or send us its part number or a photo through the chat button, and we'll confirm the match before you order. 30-day returns.
Specifications
Download spec sheet (PDF)Dimensions Dimensions The filter's size in inches (for media rolls, the length is in feet). Panel and bag filter sizes are nominal, so the actual filter can measure slightly smaller. | 13.8 in. OD x 9.4 in. ID x 26 in. long |
Filter Size Filter Size The physical dimensions or nominal size of a filter, used to ensure proper fit and compatibility with the equipment. | 1426 |
Filter Ends Filter Ends The design and configuration of a filter’s end caps or closures, which determine how the filter is sealed and mounted in the system. | Open / Open (O/O) |
Media Type Media Type The material or composition of the filter media, which determines filtration efficiency, durability, and application suitability. | Spunbond Poly |
MERV MERV A standardized rating (Minimum Efficiency Reporting Value) that indicates how effectively a filter captures airborne particles, with higher values representing finer filtration. | 11 |
Media Surface Footage (Sq') Media Surface Footage (Sq') The total surface area of the filter media, measured in square feet, which affects airflow capacity and dust-holding performance. | 100 |
Fire Retardant Fire Retardant Indicates whether the filter media or construction is treated to resist ignition and slow the spread of fire for improved safety. | Yes |
Outer Shell Outer Shell The external layer or casing of the filter that provides structural support and protects the filter media during operation and handling. | Bands |
Filter Stage Filter Stage Where the filter sits in your collector: a pre-filter catches larger particles first, the main filter does most of the filtering, and an after-filter is the final stage. | Main |
Substitute For Substitute For Identifies alternative or equivalent part numbers that this filter can replace in compatible systems. | 351D66A8588GS |






.png&w=3840&q=75)

